Recently in LED Dimmer Category

LUXEON^® Rebel Provides MORE LIGHT, LESS SPACE

The LUXEON Rebel gives you more light in a smaller package. According to Philips' website, the LUXEON Rebel provides more lumens per dollar, per package and per mm² than any other power LED available, LUXEON Rebel creates new design possibilities and challenges conventional thinking.

LUXEON Rebel is the smallest surface mountable power LED available today. With the industry's best lumens per package, highest light density (lumens per mm²), and the highest packing density, LUXEON Rebel is ideal for both space-constrained and conventional solid-state lighting applications.


FEATURES

• Lumen maintenance - 50,000 hours life at 700 mA with 70% lumen maintenance
• Moisture sensitivity level - JEDEC Level 1 unlimited floor life no need for reconditioning
• Lumen performance, > 80 lumens in cool white at 350mA
• High efficacy, flux density and lumens per package

Philips has developed a thin-film (TF) flip-chip to create a higher performance thin-film flip-chip (TFFC) LED. This technology is used in Philips Lumileds' line of Luxeon products. According to Philips, the TFFC LED offers better performance than the flip-chip structures and a higher light output and greater efficacies than vertical thin-film chips (VFC).

MORE INFORMATION:

http://www.luxeon.com/products/line.cfm?lineId=19

DC-to-DC Dimmer for LED Lighting Products, supporting 5VoltsDC to 40VoltsDC applications—up to 2Amps or 24Watts

LEDtronics Part Number LED-DIMMER-001. The LEDtronics LED Dimmer carries a two-year limited warranty.

The LED Dimmer makes it possible to dim all 5VoltsDC to 40VoltsDC LED products such as LED strip lights, LED bulbs and LED floodlights. Since LEDs draw much less current than traditional incandescent bulbs one had to buy a special high-end electronic dimmer to control the desired light levels for their LED lighting application. The DC-to-DC LED Dimmer is ideal to use for all your 12VoltsDC LED products, mix-and-match LED light strips and LED bulbs, maximum load per DC-to-DC Dimmer is 24Watts. The LED Dimmer will enhance your architectural low power high-benefit lighting designs. Here’s an extra advantage in using an LED dimmer: by lowering the current to the LED, you extend the life of the LED.

LED dimming range is 0-100% of input. Input Voltage can be any DC Voltage between 5VoltsDC and 40VoltsDC. Dimmer output Voltage is continuously adjustable between zero and full-on. LED Dimmers operate on minimal no-load current (10-15mA). Power dissipation of the LED dimmer’s drive circuitry is less than 0.7Watts. No extra load is added to the lighting circuit, current draw is only 10-15mA. Not for use with inductive devices such as motors, etc.

No special configuration is needed. LED Dimmer can drive up to 2000 Standard White discrete LEDs or 50 High-Flux LEDs. One unit can dim the supplied power for an entire lighting channel or up to 2Amps, 24Watts maximum of LED bulbs, floodlights, tube lights and light strips. The LED Dimmer can be used with 12VoltsDC solar power systems or connect directly to 120VoltsAC-to-12VoltsDC transformers. The size is 2.3inches (58mm) long by 1.9inches (48mm) wide by 1.1inches (28mm) high (excluding knob). Comes in an industry-standard hockey puck package designed for panel installation, rack installation, or stand-alone use.

Founded in 1983, LEDtronics designs, manufactures and packages state-of-the-art LEDs to meet the world’s constantly changing lighting needs. An inventive product line encompasses an array of direct incandescent lamp replacement Based LED bulbs, low-cost snap-in and relampable Panel Mount LEDs, high intensity sunlight-visible Discrete LEDs, PCB LED circuit board status indicators, surface mount diodes SMT LEDs, full-spectrum rainbow RGB LEDs and infrared (IR) LEDs.