Normal 0 0 2007-12-18T04:41:00Z 2007-12-20T18:27:00Z 1 21 120 C Allen 1 1 147 10.2006 0 0 0 Normal 0 0 2007-12-18T04:41:00Z 2007-12-20T18:27:00Z 1 21 123 C Allen 1 1 151 10.2006 0 0 0 . Normal 0 0 2007-12-18T04:41:00Z 2007-12-20T18:27:00Z 1 21 123 C Allen 1 1 151 10.2006 0 0 0 . Solutions for LED Lights: August 2009 Archives

August 2009 Archives

Philadelphia's traffic lights are all about to go LED.

The city plans to replace 55,000 green - and yellow - energy-hogging incandescent traffic signals with efficient light-emitting diodes, or LEDs.  When the project is done in two years, every traffic light at the city's 2,800 signaled intersections will be equipped with the low-wattage LEDs. (The red lights were switched to LEDs about 10 years ago.)

Philadelphia transportation and utility officials believe they can accomplish the switch at a steep discount, thanks to federal stimulus money, combined with state-required Peco Energy Co. subsidies designed to encourage energy conservation. Traffic engineers across the region are furiously writing grants to take advantage of government-inspired energy-conservation promotions.

LED technology has been around for decades, but the devices have received much attention lately as their price has come down and they have become more affordable for household use. Joseph M. Doyle, Philadelphia's chief traffic engineer, said the city converted all its red lights to LEDs in 1998. Red was the only color available then.


According to Peco, a typical 12-inch red incandescent signal lamp is rated at 150 watts and consumes $88.46 in electricity per year. A comparable LED uses 11 watts and consumes $6.49 in power. (Red traffic signals are on longer than green or amber lights, so they offer the greatest savings.)

The cost of the LED units would be supported by Peco, which included a proposal to subsidize the upgraded traffic signals in a sweeping $342 million energy-conservation plan filed last month with state regulators. State law compels electric utilities to drive consumption down 3 percent by 2013.

Municipalities began using LEDs in traffic signals in the 1990s. Peco spokeswoman Cathy Engel said that about half the region's 165,000 traffic lights were now LEDs.

Some municipalities could not wait for the incentives.

Nether Providence, Delaware County, spent $8,208 last year to convert its 15 signaled intersections to LEDs. Since then, its monthly bill for traffic signals has decreased from $860 to $143, said David Director, chairman of the township's energy committee.

The new lamps paid for themselves in a year, Director said.

SOURCE:  Philly.com

Green Directory: SolutionsForGreen.com ~ Certification Programs: GreenJobWizard.com

LED Double Lens Module Opens New Applications

OSRAM Opto Semiconductors has carried out pioneering work in the development of thin-film LEDs. Together with Dr. Andreas Bräuer of the Fraunhofer Institute for Applied Optics and Precision Engineering IOF in Jena, Dr. Klaus Streubel and Dr. Stefan Illek of OSRAM Opto Semiconductors have won the German Future Prize 2007, the technology and innovation award bestowed by the German President, for their joint development of LED-based illumination modules.

Now, thanks to new technologies for chip manufacturing, structural design (OSTAR) and beam shaping* the light output of the low-price, energy-saving LEDs has been vastly improved.

The new high-output LED modules are based on perfect synergy between solid-state physics and optics. The semiconductor components were built by OSRAM, while researchers in Jena took care of the optics.

OSRAM started developing thin-film LEDs in 1999.

The company took a major step forwards when it devised chip technology that permits the extraction of light in a single half sphere.

A novel platform for the thin-film LEDs ensures efficient temperature management and allows all colors of LEDs to be combined.

To use the light emitted by the LED chip as fully as possible, a special optic for the respective application is required and was accordingly designed and implemented by the Fraunhofer researchers. It consists of two parts: a primary and a secondary lens.

  • The primary lens collects the light emitted by the LED close to the chip and combines it to form a beam.
  • The secondary lens homogenizes the light beam.

Applications of LED Modules

  • Battery-powered digital projectors.
  • LED-based rear-projection TV
  • Infrared LED light sources for pedestrian monitoring systems in cars,
  • "OSTAR Lighting" LED module for general illumination.
  • OSTAR modules will be made standard equipment in car headlamps as of 2008.


German President Horst Köhler presented the team of OSRAM and Fraunhofer researchers with the German research award, worth €250,000, in recognition of their achievement.

This technology was developed by scientists at OSRAM Opto Semiconductors with the support of optics specialists from the Fraunhofer Institute for Applied Optics and Precision Engineering IOF in Jena.




Green Directory: SolutionsForGreen.com ~ Certification Programs: GreenJobWizard.com

EPD: Environmental Product Declaration overview


An EPD is a standardized (ISO 14025/TR) and LCA based tool to communicate the environmental performance of a product or system, and is applicable worldwide for all interested companies and organizations.

A declaration is based on a Life Cycle Assessment. It includes information about the environmental impacts associated with a product or service, such as raw material acquisition, energy use and efficiency, content of materials and chemical substances, emissions to air, soil and water and waste generation. It also includes product and company information.

Certified EPDs are open for all products and services. There is no evaluation of the environmental information since no predetermined environmental performance levels are set. Instead it builds on well-structured and quantitative data certified by an independent third part

An Environmental Product Declaration (EPD) presents quantified environmental data for products or systems based on information from a LCA conducted according to the ISO-standards for LCA. EPD is voluntarily developed information and the purpose is to provide quality-assured and comparable information regarding environmental performance of products.

The information presented in this section is based on the framework developed by the Swedish Environmental Management Council.

This system is the most internationally recognized of its kind. Certified EPDs can be found and downloaded from the web site link above.

Documents for EPD Calculation

Two documents control how the calculations and data collection behind an EPD should be conducted and what information the EPD must contain;

Requirements for the EPD system (MSR) The MSR contains general requirements for all EPDs


Product specific requirements (PSR) The PSR contains more detailed requirements for each product group.

EPDs are:

Objective, due to the requirement that scientifically accepted and valid methods are used for life cycle assessment (LCA)

Non-selective and neutral, due to the absence of valuations and predetermined environmental performance levels that must be met

Flexible, since the contents of an EPD can be amended as necessary and as required by the company/organisation after due external review and verification


Using EPD Certifications

For those using the information, EPDs can be used as a source information for factual-based and comparable environmental information about the environmental performance of products and services along the supply chain and for end-products. Specific attributes of EPDs are:

Comparable, since the information in the declarations is collected and calculated based on common harmonized calculation rules.

Credible, due to the requirements for inspection, review, approval and follow-up by an independent verifier.

Continuously up-dated, through the requirements concerning routines for documentation and follow-up procedures


ISO 14025:2006

ISO 14025:2006 establishes the principles and specifies the procedures for developing Type III environmental declaration programmes and Type III environmental declarations. It specifically establishes the use of the ISO 14040 series of standards in the development of Type III environmental declaration programmes and Type III environmental declarations.

ISO 14025:2006 establishes principles for the use of environmental information, in addition to those given in ISO 14020:2000

Type III environmental declarations as described in ISO 14025:2006 are primarily intended for use in business-to-business communication, but their use in business-to-consumer communication under certain conditions is not precluded.

Related Links

Overview: http://www.environmentalproductdeclarations.com

SO 14025:2006  Environmental labels and declarations -- Type III environmental declarations -- Principles and procedures.

Swedish Environmental Management Council
.



Green Directory: SolutionsForGreen.com ~ Certification Programs: GreenJobWizard.com

The EPD certification (Environmental Product Design), which is issued by the Swedish Environmental Management Council, is an environmental labeling system that is based on International Standards Organization (ISO, an organization that sets international standards and the U.S. member body is ANSI).  EPD certification is one of the world's most respected environmental certifications.

The SEMC awarded EPD certification based on an independent 'full life cycle' assessment of LG.Philips LCD's 32, 37, and 42-inch LCD TV panels.

This certification will help LG.Philips LCD meet the increasing consumer demand for in-depth product information, and underscores the company's commitment to environment-friendly products and manufacturing processes. In particular, as the first TFT-LCD (Thin film transistor liquid crystal display) manufacturer to obtain EPD certification, LG.Philips LCD is helping to establish environmental information disclosure standards for the TFT-LCD industry, as a whole.

LG.Philips LCD is currently ahead of government regulations in terms of environmental standards, as all of its TFT-LCD TV panels already conform to RoHS (Restriction of Hazardous Substances)  in July 2006. The company has also ensured that its production processes for other TFT-LCD products, such as PC monitors and notebook PC panels, are ready to meet the rigorous RoHS standards.

As part of its commitment to the environment, LG.Philips LCD has adopted lead-free soldering in the production of all of its LCD TV panels, and is expanding its green house gas treatment system to include all of its production lines in order to reduce emissions of PFCs, one of most hazardous greenhouse gases.

An EPD is defined as "quantified environmental data for a product with pre-set categories of parameters based on the ISO 14040 series of standards, but not excluding additional environmental information". The goal of EPD certification is "to encourage the demand for and supply of those products and services that cause less stress on the environment, thereby stimulating the potential for market driven continuous environmental improvement".

As a result, an EPD is increasingly being seen as an important tool to use when communicating the environmental performance of products in business-to-business transactions. Itcontains information about the company and product, the environmental performance of the product as well as information from the company and certification body.


 

About LG.Philips LCD

LG.Philips LCD is a leading manufacturer and supplier of thin-film transistor liquid crystal display (TFT-LCD) panels. The Company manufactures TFT-LCD panels in a wide range of sizes and specifications primarily for use in notebook computers, desktop monitors and televisions. Headquartered in Seoul, South Korea, LG.Philips LCD currently operates six fabrication facilities in Korea and has over 14,000 employees in locations around the world. For more information about the Company, please visit http://www.lgphilips-lcd.com.
Green Directory: SolutionsForGreen.com ~ Certification Programs: GreenJobWizard.com



Categories